Maintenance Technician Journeyman
3.
8 Quick Apply Full-time 3 hours ago Full Job Description Job Description Preventive maintenance on equipment, such as check lubrication levels fill and grease, clean and pump press pans.
Run recycle equipment, clean and paint equipment.
Assist some job set-ups where certain adjustments may be required which would be outside the scope of set-up associates.
Provide assistance to Production Supervisor to train associates regarding new or modified equipment.
Perform other duties related to maintenance as required by supervisor.
Job Requirements Strong ability to use independent judgment in determining work processes and actual job performed.
Basic level of demonstrated competence in electricity/electronics, hydraulic/pneumatics, individual components, system and control configurations, associated schematics and documentation.
Basic mechanical knowledge, welding, plumbing, and machining.
Design and layout electrical distribution systems for the installation of equipment.
Design and layout plumbing systems (air, water, etc.
) for the installation of equipment.
Perform troubleshooting for all equipment.
Perform repairs (to factory technology level) of air compressors.
Perform electrical repairs of all equipment.
Perform mechanical repairs (up to factory technology level) of all equipment.
Perform gas, arc, and heli-arc welding on various equipment.
Perform adjustments of vision systems and fiber optic systems.
Write technical data for set-up, checking, and troubleshooting.
Perform other duties as required by supervisor.
High school diploma or GED required.
Knowledge of arithmetic is required Basic skills in oral and written communication Comply with all Environment, Health, and Safety EH&S rules and procedures.
Computer skills - Use of CMM, Equipment software (PLC, OPI), OFFICE S/W State certified DOL journeyman's card/UAW maintenance machine repair card Working Conditions:
Degree of Physical Demands (Strength) usually associated with this classification:
Moderate to Heavy Work:
Exerting 50 to 100 pounds of force occasionally or 25 to 50 pounds of force frequently, or 10 to 20 pounds constantly.
Poundage varies tremendously due to diversity of duties.
Involves walking, standing, stooping, kneeling, and crouching on a frequent basis.
Involves climbing up to a height of approximately 25 feet.
Environmental conditions (Physical Surroundings) usually associated with this classification:
The associate is subject to environmental conditions common to a plant environment, including cramped conditions between presses and enclosures.
Some exposure to loud noise and oil.
Environmental conditions (Hazards) usually associated with this classified:
Exposure to lethal voltages, energy from compressed air, pressurized fluids, rotational force, linear movement, and pinch points associated with machinery.
Some jobs require great physical exertion.
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.
Job Type:
Full-time Pay:
$30.
50 per hour
Benefits:
401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule:
8 hour shift Supplemental pay types:
Bonus pay Signing bonus Ability to commute/relocate:
Traverse City, MI 49686:
Reliably commute or planning to relocate before starting work (Required) Shift availability:
Night Shift (Preferred) Overnight Shift (Preferred) Work Location:
One location Preventive maintenance on equipment, such as check lubrication levels Quick Apply.
Estimated Salary: $20 to $28 per hour based on qualifications.
8 Quick Apply Full-time 3 hours ago Full Job Description Job Description Preventive maintenance on equipment, such as check lubrication levels fill and grease, clean and pump press pans.
Run recycle equipment, clean and paint equipment.
Assist some job set-ups where certain adjustments may be required which would be outside the scope of set-up associates.
Provide assistance to Production Supervisor to train associates regarding new or modified equipment.
Perform other duties related to maintenance as required by supervisor.
Job Requirements Strong ability to use independent judgment in determining work processes and actual job performed.
Basic level of demonstrated competence in electricity/electronics, hydraulic/pneumatics, individual components, system and control configurations, associated schematics and documentation.
Basic mechanical knowledge, welding, plumbing, and machining.
Design and layout electrical distribution systems for the installation of equipment.
Design and layout plumbing systems (air, water, etc.
) for the installation of equipment.
Perform troubleshooting for all equipment.
Perform repairs (to factory technology level) of air compressors.
Perform electrical repairs of all equipment.
Perform mechanical repairs (up to factory technology level) of all equipment.
Perform gas, arc, and heli-arc welding on various equipment.
Perform adjustments of vision systems and fiber optic systems.
Write technical data for set-up, checking, and troubleshooting.
Perform other duties as required by supervisor.
High school diploma or GED required.
Knowledge of arithmetic is required Basic skills in oral and written communication Comply with all Environment, Health, and Safety EH&S rules and procedures.
Computer skills - Use of CMM, Equipment software (PLC, OPI), OFFICE S/W State certified DOL journeyman's card/UAW maintenance machine repair card Working Conditions:
Degree of Physical Demands (Strength) usually associated with this classification:
Moderate to Heavy Work:
Exerting 50 to 100 pounds of force occasionally or 25 to 50 pounds of force frequently, or 10 to 20 pounds constantly.
Poundage varies tremendously due to diversity of duties.
Involves walking, standing, stooping, kneeling, and crouching on a frequent basis.
Involves climbing up to a height of approximately 25 feet.
Environmental conditions (Physical Surroundings) usually associated with this classification:
The associate is subject to environmental conditions common to a plant environment, including cramped conditions between presses and enclosures.
Some exposure to loud noise and oil.
Environmental conditions (Hazards) usually associated with this classified:
Exposure to lethal voltages, energy from compressed air, pressurized fluids, rotational force, linear movement, and pinch points associated with machinery.
Some jobs require great physical exertion.
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.
Job Type:
Full-time Pay:
$30.
50 per hour
Benefits:
401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule:
8 hour shift Supplemental pay types:
Bonus pay Signing bonus Ability to commute/relocate:
Traverse City, MI 49686:
Reliably commute or planning to relocate before starting work (Required) Shift availability:
Night Shift (Preferred) Overnight Shift (Preferred) Work Location:
One location Preventive maintenance on equipment, such as check lubrication levels Quick Apply.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
